HepCatMusic.com

        Home recording studios are a very hot market in several industries right now such as audio equipment, home remodeling and home income opportunities to name a few.  So hot, in fact, it has brought about the closing of some big-name studios due to people deciding to do it all themselves. Furthermore, this is a sector of people that have largely been ignored by these industries until recently.  Consequently, the growing demand has stimulated interest to supply it on numerous key fronts leading to increased quantity and improved quality of the many component choices there are to make.

Building your own home recording studio can save you a huge amount of money if it‘s done correctly, and if not, it can cost you just as much and more.  The facilities are typically designed in a way so that they are divided into three major zones, each adequately sound-proofed and separated from the others. The main action takes place in the studio proper, also at times referred to as the “live room.”  It is essential that the rooms are carefully designed so that they have good acoustics and that there is good isolation between the rooms. 

Home recording studios are easily equipped and have prospered with the reduction in costs of Musical Instrument Digital Interface (MIDI) equipment, accessories, and digital recording software. The use of electronic instrumentation or an isolation box or booth can solve small recording studio sound problems introduced by drums and electric guitars that challenge the home studio recording artist.

At some point you can also capitalize on the opportunity of being able to charge others for the use of your recording facilities and services.  Recording studios are a major investment for any performing artist, and for the price of a demo session, you could have your own  home studio setup.  In fact, it’s possible for amateur and career musicians to outfit a home studio so it can successfully compete with expensive professional studios.

Recording studios are one of the most alluring businesses in the world.  Many people fantasize about having this kind of profession.  They are rapidly proving that they can be successful business ventures, too, given the right location and the right promotion.  Here are three more key factors that contribute to success:

     1) Charge appropriately.  You can only make money if you set your prices sufficient to cover costs and earn a profit.  As a studio owner, your time is money as well – and you have to charge accordingly. A lot of people think opening a studio and charging dirt cheap prices will help them win customers.  WRONG!   That’s a recipe for disaster. Believe me, you need to know this before you ever consider starting a studio business.

2)  You need to learn and apply the  80/20 rule of recording studio headaches. You will find that 80% of your stress and problems come from 20% of your clients. And the worst part is… those clients aren’t worth the money that they are paying you.  It is very important to learn how to filter out problem customers so that you can maximize the time you spend with friendly, high-paying customers.  Why?  Because that will bring you even more business later!  Yes, you read that right.  The best customers will send you more new clients to work with.  But you have to learn how to make them do this.

3) You can turn many of your friends into the best “street team” on the planet!  It’s quick, it’s effective, and it will make you more money than you can imagine.  Plus, your street team will love you.  Almost everyone you know is going to be interested in your studio business.  You have a cool job!  Get used to it.  When you tell people about it, they will want to get involved.  Learn to harness that power!  Make more money from their work.  That’s how the world’s richest business moguls get the job done.

     So, the bottom line is that there can surely be a lot of fame and fortune and glamour and pleasure gained from owning and operating a home recording studio properly and profitably.  It can also be your biggest nightmare.  If your enthusiasm for the former is greater than your fear of the latter, then I encourage you to learn all the tricks of the trade from a master like Reuben Rock of Memphis, TN.  You can watch the free video review of the “Recording Studio Profits” training program that he offers on our website and blog at http://www.jujamvideoreview.com/recordingstudioprofits.html.

Public Record, People Search And Background Check Software.
Net-Vestigator Investigation Software.

There are many things to consider when you’re in the market for some home studio recording software. With a little research, you can get the right software without having to buy all kinds of different recording packages. In fact, there are some programs that have so many tools built-in that you may only need one program for your recording work.

Overall, you will want software programs with these types of functions:

Samplers

Soft synths

Effects

Tools for mastering

Tools for mixing

Dynamic software

and many others might come in handy

For all of these uses, you can probably buy a software program but that will start to cost you after you’ve purchased 2 or 3 of them. So why not try a DAW (digital audio workstation) instead, that offers a whole range of tools in one package. Don’t be fooled by the all-in-one approach. Many DAWs include very high-quality software. Some feature-packed ones are Sonar 8, Pro Tools and Cubase. Of these three, Sonar 8 has the best selection of integrated features, including these tools:

Guitar Rig 3 LE

Roland V-Vocal 1.5 voice modeler

TruePianos Amber

VX-64 Vocal Strip multi-effects processor

PX-64 Percussion Strip

VC-64 Vintage Channel dynamic processor

Boost 11 peak limiter

LP-64 EQ Linear equalizer

Transient Shaper- LP-64 Multiband- Roland TTS-1

Dreamstation DXi analog modeler

TL-64 Tube Leveler

Rapture LE- Z3TA+- Sonitus

DropZone Sampler

and many other software tools too

Sonar 8 is clearly going to provide you with a wide range of software, tools, effects for all your mixing and mastering requirements. That’s not to say that Pro Tools or Cubase aren’t good choices either. Both of those packages also come with a bundled set of programs for your home studio recording needs as well. Any of them will enable you to create professional sounding recordings at home.

The best idea is to try a good quality DAW, and after using it for a while then you can decide if your recording projects warrant getting more specialized software for any specific jobs, like getting some dedicated reverb or mastering programs.

Super High Conversion Rates In A Great Niche Market. Microsing Karaoke Recorder : The Award Winning – A Recording Karaoke Softwa.
New – Karaoke Recorder Software – Super.

Now that you have had a general introduction to recording, specifically for tracking a live show, this Independent Artist Website will give you an overview of studio recording, from the usual rent-a-pro approach to setting up your own project studio.

First things first: You have to decide who is going to be the producer, even before deciding on the engineer. None of the later decisions about tracking instruments, recording vocals, doing overdubs, processing signals, or getting a final mix will mean Bo Diddley, to coin a phrase, if your bands three or five or eight members are arguing all the time about who sounds the loudest and what so-and-so’s girlfriend is doing in the vocal booth. Someone has to run the show.

This is even true for a solo act in independent artist, since in a studio leadership vacuum most seasoned (or semi-seasoned, or even just salty) engineers will step right up and make the decisions for you. If the band does not present a united front behind its leader, the whole process will be at risk. So, before anything else, decide

•    Who will be the producer?
•    What arrangements of what songs will be recorded?
•    How much debate and democracy will be involved in the process,
•    When the various deadlines are going to be set, and
•    Why things are going to be run them way they are.

Now is the time for clarity, group cohesion, and common goals. Larger-than-life egos and delusional daydreams have to be left at the door (better yet, down the street) so that a workable, affordable, efficient, and effective plan can be developed — and pursued to a successful conclusion. Everybody needs to get on the same page (or play the same tune, or whatever metaphor you prefer). Now you are as ready as you are going to be, so what is next?

Well, as usual, it is about money, mostly, and time, too. What is the working budget? Can you afford (and do you want to afford) to go into a project-level studio at $30 an hour with engineer included? A pro studio at $50-100 an hour with engineer maybe included? To make these calculations, you need to have your songs down pat, know how you are going to record them (rhythm section together or dubbed) and how long all of it will take. If you are doing a three-song played that is one thing; if you are doing your debut CD with 11 tracks that is a whole other thing. For simplicity is sake, and to keep consistent examples from here forward, let’s go with your demo for now.

The whole decision process can take a U-turn if one of the band members, or a good (really good) friend, has a decent project studio set up — meaning pro and semi-pro equipment, a decent recording room, good microphones (and cables!), and so on. So, this is the second big decision, after choosing the producer, but it is not one that the newly christened producer should make alone. Once again, unanimity is vital.

Wherever you do the sonic deeds, if you are recording your drummer and bassist (and maybe a guitar or keyboard too) as a unit, which imparts an organic feel to the tunes, then you will need baffles, sound deflectors, etc., to minimize bleed. You will have to have headphones for everyone, good mics that are properly placed, quality cabling to minimize hum and pops, and so forth. If this is all starting to sound awfully complicated, opt for the best mid-level project studio in town, the one with good equipment and a decent studio, if not state-of-the-art. We were doing your demo, remember? Not your platinum-worthy debut.

Most likely, the studio will have a computer-based recording system, with a Mac or PC running one of the major Digital Audio Workstation (DAW) software applications — Apple’s Logic, Cubase, Digital Performer (Mac only), Sonar (PC only), or some other. You probably don’t want to do your demo with entry-level programs like Apple Garage band or Cakewalk’s Home Studio unless you have to; they are competent in the tracking arena, but fall way short in terms of plug-ins and quality of effects (like reverb) that are essential to the project.

If you do not see a number of different kinds of microphones, you will at least want to see the trusty Shure SM-57s and 58s for miking guitar amps (and using as drum overheads) and at least one good condenser mic for vocals. There should be a decent outboard mixer available, if not always used with the DAW, a sufficient number of cans (headphones) for everyone, Monster or other quality cables, perhaps a piece or two of vintage rack gear, and pro-level monitors (for Pete sake, no living room stereo speakers). If the producer is not a gearhead or audio pro, well, he or she will need to study up on the subject, or find a good (low-paid) consultant.

If you have your plan together; if your parts are practiced and tight; if your excitement level stays high despite the ups and downs of getting your demo project together — well, you are in about the best shape you can be, considering the importance of what you are doing. You will need the help of a good, flexible, communicative engineer, so do not make a hasty decision about where to do your demo recording. Talk to different people, get referrals, interview studio owners, ask tough questions, and keep your priorities straight. If you get too off into the equipment and the process, well, maybe you should be in the recording music business, and that is okay, too. But never lose sight of what is really important, and the reason you got into all this in the first place: the music.

It is about the music, folks. If you need reminding, put a big sign on the refrigerator.

Low-Budget Equipment Advice on Music Recording Necessities

Designing an unused room can be exciting; with a little bit of creativity and a few purchases, you can build any room for any purpose. If you are into music, reconstructing your room into a recording studio can instantly pave way for a small sideline business or a great hang out with friends and bring music compositions to the next level.

Being serious with your hobby is a good thing, and the next best thing can be injecting some entrepreneurial spirit into your pastime, that, a recording studio made out of an old room can be a quick and practical solution. Providing a haven for musicians within your circle can surprisingly breed genius musical ideas and compositions, and using print postcards in the near future to fully promote aspiring artists, or even yourself, can be a great solution. With just a few design and purchase tips, your room can be functional and professional-looking in just a matter of days.

1. Audio Mixer: Without this equipment, your chances of building a recording studio of your own will not happen. An audio mixer or sound board is the heart of every recording since this is what controls the level of timbre and other dynamics in recordings; without this, an input of the vocals and instruments cannot be blended in accordingly. You do not need to purchase a brand new one; asking around in different DJ mixing schools, DJs themselves, clubs, schools, or teachers in the field can easily lead you to buying much cheaper equipment.

2. Carpet or Foam-based Walls: Music recorded has to stay within the parameters of the room for reasons that you need all sounds produced to bounce clearly for proper soundproofing. This way, you can capture acoustics precisely and accurately. Usually, soundproofed rooms are structured with patterns and grooves; but for a cheaper solution for homes, you can use foam on canvas boards, carpets, or heavy drapes to dampen and reduce sound pressure.

3. Flooring: To add more to soundproofing, carpeting your floors also provides better soundproofing for any recording.

4. Reference or Studio Monitors: At your computer area, having near field monitors will help when you are triggering with notes and recording. Your large mid field monitors are used for when you are at your mixing desk; this set of monitors is what helps in evaluating crispness and balance of sound.

5. Speakers: Purchasing a good set of speakers is also important; with positioning, avoid placing them at the corner but instead a few inches away to avoid excessive bass boost.

6. Lighting: Using dim lights can build an atmosphere for being more creative; just make sure the dimness is still workable to read though music sheets. Adding fixtures such as lava lamps and dimmed spotlights can help increase mood.

7. Musician Recording Tools: Have at least five microphones present. Purchasing a dynamic microphone can already suit a small recording studio plus these items are fairly cheap compared to others. Sometimes, they come packages fit for vocal and drum recordings.

8. Digital Audio Workstation: Choosing a good kind of software to install in your computer is one thing you should spend time looking for. This is where recording, editing, and playback are produced; without this, you will not be able to manipulate the sounds coming in from the recording.

These items may seem difficult to set up and expensive; but you will be surprised that cheap finds are just around the corner and will still give you the same benefits brand new and modern equipment provide. What’s important is that you get to produce and record music; and eventually turn this into a running small business. As you progress, getting postcard printing done to give to your prospects can specifically hit a group of people. This way, your promotions are effective and cheap as well.

Today, music is one of the biggest entertainment businesses in the world. This market is hotter for many reasons. First of all, customers’ demands and tastes are higher and more diversified than ever. Second, the number of people and companies working in this field are increasing at such a dizzy speed that it creates a very large pool of tough competition, and of course, to survive, they have to be unique and famous.

We can list out enclosed some relevant industry jobs such as Recording, Radio, Television and other Media, Working live shows and tours, Music Retailing and Instrument Repairing, Education and Instruction and many more. Among them, the recording industry is one that has been applying high-end technologies for many years.

Regarding recording industry, we consider that this is not only a technical but also a creative career. High-end technology is useful for both sides of this job. Recording engineer definitely must be technically skilled with the equipment. They must manipulate skillfully with all the buttons or knobs to get the correct sound that the artist or the producer want to have. A good microphone is necessary in the first step to begin with the recording process. And then, with the instruments, they find out the expected sounds – not music.
The recording engineer, finally, will make the adjustments to enhance the music, morph, add effects… Some years ago, in order to do these steps, they had to resort to much equipment. In this case, the results obtained take a lot of the engineers’ time and labor. However, today, thanks to the development of high-end technologies, recording engineer can apply modern equipment to make their work easier and more professional. One simple example, with a PC and some installed music morphed, music editor softwares, they can mix and edit music like a skilled recording engineer.

The process of consolidation and legal annihilation has been going for years, but the month of May witnessed an impressive flurry of activity. Vivendi Universal purchased MP3.com. Bertelsmann bought Myplay.com.
Encouraged by its success at mortally wounding Napster, the Recording Industry Association of America (RIAA) filed lawsuits against Aimster, a file-sharing utility that works with instant messaging software, and Launch, an Internet music site with impressive personalization capabilities. In the months previous, independent companies fell like dominoes: eMusic, Scour, IUMA, SonicNet, Musicbank, CDNow — those that haven’t been bought by their competitors have gone bankrupt or been forced to lay off virtually their entire staffs.

More and more recording engineers believe in the important role of high end technology for their career. They are willing to spend money on equipment, modern music editor or music morpher softwares to support their work. Some people pay up to thousands of dollars for their recording studios, but some know how to save money. They find out the efficient softwares that can work properly as a mixer, an editor with very competitive price from $30 to $100. They know how to update their “companion” by frequently downloading the latest effects or supporting programs. By this way, high-tech supports for both professional recording studios and some home recording studios.

When Microsoft acquired Great Plains Software and then integrated Great Plains into so-called Microsoft Dynamics ERP products family as Dynamics GP, modification tools became more Microsoft and .Net oriented, as you could expect.  However in the initial design in earlier 1990th Great Plains Dynamics was intended as multi platform product and its fundament was built on new technology named Great Plains Dexterity.  Considering complicated origin of GP, let’s review development tools:

1.       Dexterity.  Great Plains Dexterity, as we already mentioned is the heart of GP design, and it is in turn written as the shell in C programming language to secure certain flexibility, especially the option to switch from one operating system or computer platform to another.  Being very powerful and flexible, Dex doesn’t facilitate so-called rapid development scenario as it is not object oriented and it requires you as programmer to have several years of extensive Dexterity programming prior to participation in Dexterity programming project.  Dexterity has its own scripting language Sanscript.  Latest versions of Dex support such cool Microsoft technologies as COM objects and Web Services, plus you can call SQL Stored procedures from Dex code.  To get quick tour into Dexterity architecture, you may install it from GP CD #2 and open Dynamics.dic file – this dictionary has core GP logic and it is written in Dexterity

2.       VBA and Modifier.  We were watching closely the competition between various GP customizing tools.  And we still think that Modifier should be reviewed prior to eConnect.  Modifier is in essence the module, written in Dexterity, which allows you to add buttons and fields to existing screens of GP as well as take them off.  To animate new fields you use VBA scripting language, often you use ADO technology to access GP tables from modified forms

3.       eConnect.  This SDK opens for you GP objects: master records (customer, vendor, GL Account, employee, prospect) and work transactions (SOP invoice, Purchase Order, Payroll Entry).  eConnect is based on encrypted SQL stored procedures, plus it has several layers of technology wrappers – in fact it is friendly for Microsoft Visual Studio C# or VB developer.  If you are integrating eCommerce website with your GP back office, we recommend you to consider eConnect as the main integration tool, also consider Autoposting Server to post batches of SOP invoices in GP

4.       SQL Stored Procedures Integrations.  If you think eConnect is too heavy and complex and you are comfortable to do light SQL insert statement to populate GP tables, then SQL scripting is an option.  However, we discourage newcomers from trying SQL insertion prior to researching other integration tools first

5.       GP Integration.  Of course integration is not the same as customization, however we would like to orient you here as well.  GP traditionally has Integration Management Module.  With current version 10.0 IM has new connectors – from now on you can use eConnect connectors to do integrating

There was a time that the analysis of spectral composition whether it is an electrical, acoustic or optical waveform was done using a large machine similar to those used in a recording studio.

These days, computers and other machines can do the same by simply downloading the software. Here a few examples of those readily available.

1. If the person at home is using either Windows2000 or XP, the program called Spectrogram 14 can offer a spectrum analyzer scope display in real time for any source that is connected to the sound card.

This in turn allows the user to download songs so this can be played back later on with clarity for easy listening. The software can also be used to analyze biological and bat echolocation sounds as well as the identification of human speech.

2. An older program that can also be downloaded is the DL4YHF Audio Spectrum Analyzer. This was already out in the market even before windows came out using the DOS system. To be able to keep up with the times, a digital version was launched.

This is better known these days as a specialized audio analyzer that can act as a data logger, filer and a frequency converter.

3. The OscilloMeter also known as Spectrum Analyzer 4.14 is another good choice. It comes with a frequency counter, noise and distortion meter, phase shift meter and a voltmeter. The only catch is that this has to be bought for $399.

4. The SpectraScope is something that will be very useful for the professional audio engineer or someone who is just a hi-fi enthusiast. The individual can listen to four different sounds simultaneously or separately for easy comparison.

It supports all Windows Operating systems and this can be downloaded for a free trial for just $30. People who like what it can do can buy the program later on.

5. TrueTRA, a company based in Tennessee has a similar program that is not that expensive. For less than $40, the person can buy the program and then use it to analyze sounds using the different meters it has.

Most of the downloadable spectrum analyzers are free. It doesn’t occupy a lot of space in the hard drive for this to work. The only thing needed is an Internet connection so this can be installed in a few minutes and the person can begin to use it.

Scientists and engineers need a spectrum analyzer in order to study wavelengths. These machines are expensive and if the person doesn’t have one, the best thing to do will be to a refurbished unit that is much cheaper. The individual may find one in the junk shop and then replace the old parts with those that can be bought in Radio Shack. However, there is another way to do such studies without spending so much on equipment.

The person can do this by downloading the software in the computer. If the engineer has a laptop or a desktop at home and is using a Windows as an operating system, a program that will work is the Spectrogram 14 that has a heads up display showing everything in the monitor. This can be used to analyze video and audio files that are stored in the computer’s hard drive. An amateur video director can even use this to edit the film before showing the final product.

Another good choice is the Oscillometer that is known by some as the Spectrum Analyzer 4.14. It has other things that appear on the display, which is why it will cost a little over $400, but this will still be cheaper than getting a brand new spectrum analyzer that could occupy a lot of space in the office.

Sometimes, the sound engineer has to bring some work home. Another program that can be downloaded into the computer is the Spectra Scope, which allows the user to listen to up to four tracks simultaneously or one by one. For those that are skeptic about what this program can do, the individual can sign up for a free trial for just $30 and if happy, the customer can purchase the entire package later on.

People who can’t afford to spend something above a hundred dollars and are unsure if something free can work can try the TrueTRA that can be bought for less than $40. It also has the different meters to analyze wavelengths just like the others.

Buying a refurbished spectrum analyzer is like buying a second hand car that has to be put together for it to be up and running again. The individual may not have the time to get the parts one by one so downloading this for free or buying a copy of the program at an affordable price seems to be the better option to get the job done.

The technology for live dealer casinos has made some significant improvements over the last few years, providing a whole new level of excitement and realism to online gaming. There are two predominant software development companies who have fine tuned this technology and can now provide an internet experience that is above and beyond the internet-only casinos. These software companies are VueTec and Playtech. While they differ in their basic methodology and philosophy, they both deliver a very impressive product that is safe, secure, and realistic.

VueTec is a software development company that is based in the United Kingdom. Their staff has had a hand in the operations and management of casinos worldwide with over 70 years of experience under their belt. They have been granted patents for gaming devices and methods in the UK, Europe, and the USA. VueTec actively develops and supports software solutions for real casinos, while providing an internet experience with live dealers that is one of the best available to date.

VueTec utilizes the Distance Gaming platform, which allows players to participate directly in games that are being played in a real land-based casino, with the use of a home pc and an internet connection. The software provides actual footage of a game as it is in progress. The Distance Gaming system connects the player with the casino through sensors, cameras, displays, and a game controller which has been added to each table. This allows the progress of the game to be monitored on a central server, which then communicates with each of the game controllers at the individual tables. The information that is provided to the server is combined with the actions of each internet player, allowing for a smooth experience in the game.

Games are provided to the customers through their web browser, and the software is written in Java programming language. The program will automatically download into a cache file the first time that one of the games is played and is then stored on the PC for future use. No manual installation is required to begin gaming, and no technical expertise is necessary to begin to play. This software is compatible with both PC and Mac users, which is good news for Mac players.

One of the benefits of Distance Gaming is that it is so user friendly and secure. Members can easily access to their gaming accounts, and can deposit funds either online or at the casino cash desk. The level of security is extremely high, with all communications between the casino’s Distance Gaming server and the player’s pc protected through the use of SSL encryption, making tampering and interception impossible.

In a nutshell, VueTec offers an advanced technology that provides one of the most realistic online gaming experiences with live dealers available today. It is one of the very few gaming platforms that has the technology to be downloaded by Mac users. There are no pop-ups, no installation, only one initial automatic download, and it is written in Java, which is accessible to everyone. There is no waiting for a spot at a table; when you are ready to play, there will be a spot for you. On the downside, it takes some getting used to learning how to play Early Payout Blackjack, but once you get the hang of it, you will find that it is every bit as fun as the more traditional Blackjack.

The other major software company that has the technology to offer live dealers is Playtech Software Development Co. Playtech is one of the world’s largest publicly traded online gaming software suppliers, and is a leader in the industry. They are highly regarded for delivering high quality products and excellent customer service. The workforce at Playtech is young and talented, and believes in a customer-led development philosophy. Their software carries an official certificate of RNG Evaluation from TST (Technical Systems Testing). TST is independent and impartial testing organization which analyzes the operation of gaming products to make sure that they are fair and secure. There are some pretty stringent and comprehensive legislative and regulatory requirements that are placed on casino owners and operators, and the TST makes sure that these are met. Playtech also carries a certification from ABB, with is the leading trade association representing bookmakers in Great Britain. The ABB’s helps to create an environment where the public can enjoy fair and responsible gaming.

The Playtech software company uses the Live gaming Platform, which provides live dealers through advanced video streaming technology. Players can watch the dealers perform real-time actions like dealing cards or spinning the roulette wheel, as well as communicating with the dealer through the 1-on-1 chat feature. Having live dealers in the game can help bring the online gaming experience to the next level.

Playtech’s Live Gaming system has added some new features, such as VIP Baccarrat, new Baccarat variations, and Baccarat score cards. The Live games menu offers table information with real-time table history, along with pictures of the each of the live dealers. The graphic layouts are sharp and user friendly, and the video quality is excellent. All of the Live Studio footage is recorded, so it can be reviewed at any time it is needed.

In summary, the Playtech software has some of the best graphics available today in online gaming. There is a download required, but it is very quick, simple, and user friendly. Be aware that there are pop-ups that will accompany this download. Unfortunately, Mac users are unable to access or download this software. On the plus side, there is a wide variety of games offered with this software, and the blackjack games that are offered are the more traditional games that players are familiar with. However, if you do want to play blackjack or baccarat, you can expect to wait for a seat at any of the tables since ther is only one person per seat. Roulette players can rest easy though, since there is always a spot at the roulette table.

Whether you decide to try out the Distance Gaming Platform or the Live Game Platform, you just can’t go wrong. Both have the technology to offer live dealers in their games, and they are both equally good in quality and security. This can only make the games so much more enjoyable and realistic for you. As for me, I just can’t wait to see what the technology of tomorrow will bring in online gaming